Mastering Desktop & Mobile: Incorporate Timestamps on YouTube

How to Add Timestamps on YouTube Video Link?

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

• Part 1: YouTube Timestamp Links Introduction
• Part 2: Adding a Timestamp to YouTube Video Link on Desktop
• Part 3: How to Share Specific Parts of YouTube Video
• part 4: Getting YouTube Timestamp Link on Mobile
• Part 5: FAQ About YouTube Timestamps

Part 1: What is YouTube Timestamp Links

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

1. Open the YouTube video on your desktop that you want to share.
2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

1. Visit YouTube and open the video you want to add Timestamp link to.
2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Part 4: How to Get YouTube Timestamp Link on iPhone and Android?

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

1. Go to YouTube and select the video you want to share.
2. Move through the progress bar of the video to reach the key part and click on the Share button.
3. A pop-up menu appears, highlight the URL and click on the Copy button.
4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Bonus: How to Add YouTube Timestamp Link in YouTube Video Description

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
2. Edit the description by clicking on the Edit Video button.
3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Achieving Profitability on YouTube: Average View Count for Success

Every influencer wants to make it big on YouTube. However, the YouTube view monetization programs are not that clear. Most people don’t even know how YouTube monetization views work. How many views on YouTube do you need to start making money from your content on the platform? Some people have even been made to believe the common misconception that views alone determine the amount of money a YouTuber earns. Let’s have a look at what entails views for YouTube monetization and the factors that affect your earnings on the platform.

YouTube Channel Grower A cross-platform for enhancing and editing YouTube videos for more engagement!

Free Download Free Download Learn More

Part 1. The Real Number of YouTube Views You Need to Make Money

Despite a lot of people seeking a successful career on YouTube, only a handful make it big on the platform. Some of the big names like Mr. Beast have proven how lucrative YouTube can be with the right following. However, for newcomers or beginners, succeeding on YouTube is a challenging feat.

The most burning question is how many monetized views on YouTube do you need to make money? A great deal of creators are still aiming to monetize YouTube views. Let’s have a look at what YouTube monetization review time involves and the views that get paid.

Eligibility to YouTube Views Monetization

Ideally, you will start earning ad revenue on YouTube for every 100 views on your videos. This will only happen after being accepted to the YouTube Partner Program (YPP). The program enables revenue sharing from ads and gives creators access to more features and resources like the Copyright Match Tool.

Anyone residing in countries where the YPP program is available can apply, To get accepted, you will need to meet the following requirements

• 1,000 + Subscribers and 4,000+ public watch in the past 365 days, or
• 1,000 + Subscribers and 10M+ public watch in the past 90 days

Which YouTube Views are Paid

The ad revenue generated from the program is split between different parties. Specifically, Google pays out $68 for every $100 an advertiser pays to the publisher. However, YouTube earns only when viewers skip the ad before 30 seconds, which means you will not be paid. With only an estimated 15% of the viewers watching the required 30 seconds of a video to qualify for payment, not every view will result in being paid. Only the YouTube monetization per view gets paid.

Factors Affecting the Number of Views Needed to Make Money

To make good money on YouTube, however, you’ll want to cross the 100,000 views per video mark. This may sound easy, but getting the accurate amount earned is more than just these simple numbers. Several factors are involved:

• Your youtube niche
• The level of viewers’ satisfaction
• The value of your views or presentation’
• The rate of engagement in your videos

The main factor that determines how many views for YouTube monetization you need to make money is niche. For instance, a channel in the Finance and Technology niche will make more money per 1000 views than those affiliated with comedy or gaming. This is because YouTube channels are monetized by Google Adsense, which pays more for more profitable niches.

On average, you can earn between $1 to more than $25 per 1,000 monetized views on YouTube. This comes down to the specific content you are making and the niche of focus. Those in niches like Finance and Tech will make more money because the Revenue Per Mille (RPM) is higher than other niches. In terms of engagement, videos with higher click-through rates (CTR) and average view duration (AVD) tend to earn more from ads. Other factors such as the country where your viewers are located, time of the year, and type of ads you are running also affect the money earned.

Part 2. Factors That Affect Your YouTube Earnings Per View

The amount of money that YouTubers make may seem complex to understand. Does YouTube pay per view? Yes, but not per video view. YouTube will pay you for views that appear on your channels. The actual revenue will depend on several factors.

• Factors Affecting Earnings per View
• YouTube’s Revenue-Sharing Model
• Attracting Higher-Paying Advertisers
• Other Revenue Streams on YouTube

Factors Affecting Earnings per View

The amount of money YouTubers make per view is affected by various factors:

• Ad Revenue Rates: The rates vary depending on the country where viewers are located, the time of the year, and the ad your YouTube channel is running.
• Audience Demographics: Advertisers usually pay more to show their ads to viewers in some demographics, especially those who are interested in specific products or have a high income.
• Audience Engagement: Videos with high CTR and AVD earn more income from ads.
• Watch Time: YouTube channels with longer viewers watch time earn more money.

YouTube’s Revenue-Sharing Model

The YouTibe’s revenue-sharing model determines how much creators are paid. The standard revenue share is 55% for the creator and 45% for YouTube based on views that generate money. However, the platform may adjust the revenue share for certain creators. This may include creators participating in a special program or those who are part of a network.

An Ad blocker can reduce a YouTuber’s earnings. They prevent ads from displaying on videos, and consequently the creator from earning money that you have generated from those ads. As they become more popular, YouTube estimates that ad blockers cost creators billions of dollars in lost revenue every year.

Attracting Higher-Paying Advertisers

Higher-paying advertisers are interested in YouTube channels that align with these features:

• Audience Demographics: Higher-paying advertisers are interested in videos that show certain demographics. For example, an advertiser of a luxury car will pay more to show ads to viewers who are interested in such cars.
• Audience Engagement: Higher-paying advertisers are willing to pay more to show their ads to channels with higher engagement to increase the chances of people clicking on their ads.
• Watch Time: YouTube channels with longer viewers watch time attract more advertisers. This is because viewers will be engaged for longer periods, increasing their chances of viewing the ad.

Other Revenue Streams on YouTube

You can earn a lot more per 1,000 views by influencing your viewers to buy products even before your channel gets monetized. Other ways of making money on YouTube include

• Selling branded merch or courses
• YouTube Premium subscriber’s subscription fee
• Recurring monthly payments by members for special benefits
• Highlight fan’s messages in chat streams
• Sponsorships by partnering with brands to promote their products or services
• Affiliate marketing
• Brand deals

Part 3. Editing YouTube Videos for YouTube Monetization with Filmora

Good content will increase audience engagement and grow your YouTube channel. Wondershare Filmora offers a range of features that make video editing quick and easy. From instant mode for beginners to AI features for automation, the Filmora is like your partner in video editing.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

With Filmora, you can enhance and edit your videos for more engagement on YouTube. You can also edit images posted on Facebook, such as thumbnails. Here are some of the top features to explore.

1. Split Screen Video Editor

With a wide range of pre-made templates to choose from, split your video screen with a single click. Choose to put to videos side to side or in any way that you like.

2. AI Image

Automatically generate images by typing what you want. The text-to-image feature generates 3 resolutions that you can use directly for your video project.

3. Keyframing

The keyframing feature creates fantastic visual animations. It allows users to change position in the hand-drawing pattern and customize opacity to make shorts precise and concise. You can also scale the subject of the clip.

4. Speed Ramping

The speed ramping feature allows you to adjust the speed in your video to be in better control of your keyframes.

5. Mask & Blend

The mask and blend feature of Filmora allows you to make a creative video clip. It comes with a pen tool for creating free-form shape masks.

Conclusion

With YouTube monetization how many views does it take to make money? This will depend on a variety of factors, but the sweet spot is after hitting 100,000 views per video. Since the quality of the content you upload can influence how much you make, we recommend using Wondershare Filmora to edit your videos. The video editing software comes with fantastic features for creating highly engaging videos.

Free Download Free Download Learn More

Part 1. The Real Number of YouTube Views You Need to Make Money

Despite a lot of people seeking a successful career on YouTube, only a handful make it big on the platform. Some of the big names like Mr. Beast have proven how lucrative YouTube can be with the right following. However, for newcomers or beginners, succeeding on YouTube is a challenging feat.

The most burning question is how many monetized views on YouTube do you need to make money? A great deal of creators are still aiming to monetize YouTube views. Let’s have a look at what YouTube monetization review time involves and the views that get paid.

Eligibility to YouTube Views Monetization

Ideally, you will start earning ad revenue on YouTube for every 100 views on your videos. This will only happen after being accepted to the YouTube Partner Program (YPP). The program enables revenue sharing from ads and gives creators access to more features and resources like the Copyright Match Tool.

Anyone residing in countries where the YPP program is available can apply, To get accepted, you will need to meet the following requirements

• 1,000 + Subscribers and 4,000+ public watch in the past 365 days, or
• 1,000 + Subscribers and 10M+ public watch in the past 90 days

Which YouTube Views are Paid

The ad revenue generated from the program is split between different parties. Specifically, Google pays out $68 for every $100 an advertiser pays to the publisher. However, YouTube earns only when viewers skip the ad before 30 seconds, which means you will not be paid. With only an estimated 15% of the viewers watching the required 30 seconds of a video to qualify for payment, not every view will result in being paid. Only the YouTube monetization per view gets paid.

Factors Affecting the Number of Views Needed to Make Money

To make good money on YouTube, however, you’ll want to cross the 100,000 views per video mark. This may sound easy, but getting the accurate amount earned is more than just these simple numbers. Several factors are involved:

• Your youtube niche
• The level of viewers’ satisfaction
• The value of your views or presentation’
• The rate of engagement in your videos

The main factor that determines how many views for YouTube monetization you need to make money is niche. For instance, a channel in the Finance and Technology niche will make more money per 1000 views than those affiliated with comedy or gaming. This is because YouTube channels are monetized by Google Adsense, which pays more for more profitable niches.

On average, you can earn between $1 to more than $25 per 1,000 monetized views on YouTube. This comes down to the specific content you are making and the niche of focus. Those in niches like Finance and Tech will make more money because the Revenue Per Mille (RPM) is higher than other niches. In terms of engagement, videos with higher click-through rates (CTR) and average view duration (AVD) tend to earn more from ads. Other factors such as the country where your viewers are located, time of the year, and type of ads you are running also affect the money earned.

Part 2. Factors That Affect Your YouTube Earnings Per View

The amount of money that YouTubers make may seem complex to understand. Does YouTube pay per view? Yes, but not per video view. YouTube will pay you for views that appear on your channels. The actual revenue will depend on several factors.

• Factors Affecting Earnings per View
• YouTube’s Revenue-Sharing Model
• Attracting Higher-Paying Advertisers
• Other Revenue Streams on YouTube

Factors Affecting Earnings per View

The amount of money YouTubers make per view is affected by various factors:

• Ad Revenue Rates: The rates vary depending on the country where viewers are located, the time of the year, and the ad your YouTube channel is running.
• Audience Demographics: Advertisers usually pay more to show their ads to viewers in some demographics, especially those who are interested in specific products or have a high income.
• Audience Engagement: Videos with high CTR and AVD earn more income from ads.
• Watch Time: YouTube channels with longer viewers watch time earn more money.

YouTube’s Revenue-Sharing Model

The YouTibe’s revenue-sharing model determines how much creators are paid. The standard revenue share is 55% for the creator and 45% for YouTube based on views that generate money. However, the platform may adjust the revenue share for certain creators. This may include creators participating in a special program or those who are part of a network.

An Ad blocker can reduce a YouTuber’s earnings. They prevent ads from displaying on videos, and consequently the creator from earning money that you have generated from those ads. As they become more popular, YouTube estimates that ad blockers cost creators billions of dollars in lost revenue every year.

Attracting Higher-Paying Advertisers

Higher-paying advertisers are interested in YouTube channels that align with these features:

• Audience Demographics: Higher-paying advertisers are interested in videos that show certain demographics. For example, an advertiser of a luxury car will pay more to show ads to viewers who are interested in such cars.
• Audience Engagement: Higher-paying advertisers are willing to pay more to show their ads to channels with higher engagement to increase the chances of people clicking on their ads.
• Watch Time: YouTube channels with longer viewers watch time attract more advertisers. This is because viewers will be engaged for longer periods, increasing their chances of viewing the ad.

Other Revenue Streams on YouTube

You can earn a lot more per 1,000 views by influencing your viewers to buy products even before your channel gets monetized. Other ways of making money on YouTube include

• Selling branded merch or courses
• YouTube Premium subscriber’s subscription fee
• Recurring monthly payments by members for special benefits
• Highlight fan’s messages in chat streams
• Sponsorships by partnering with brands to promote their products or services
• Affiliate marketing
• Brand deals

Part 3. Editing YouTube Videos for YouTube Monetization with Filmora

Good content will increase audience engagement and grow your YouTube channel. Wondershare Filmora offers a range of features that make video editing quick and easy. From instant mode for beginners to AI features for automation, the Filmora is like your partner in video editing.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

With Filmora, you can enhance and edit your videos for more engagement on YouTube. You can also edit images posted on Facebook, such as thumbnails. Here are some of the top features to explore.

1. Split Screen Video Editor

With a wide range of pre-made templates to choose from, split your video screen with a single click. Choose to put to videos side to side or in any way that you like.

2. AI Image

Automatically generate images by typing what you want. The text-to-image feature generates 3 resolutions that you can use directly for your video project.

3. Keyframing

The keyframing feature creates fantastic visual animations. It allows users to change position in the hand-drawing pattern and customize opacity to make shorts precise and concise. You can also scale the subject of the clip.

4. Speed Ramping

The speed ramping feature allows you to adjust the speed in your video to be in better control of your keyframes.

5. Mask & Blend

The mask and blend feature of Filmora allows you to make a creative video clip. It comes with a pen tool for creating free-form shape masks.

Conclusion

With YouTube monetization how many views does it take to make money? This will depend on a variety of factors, but the sweet spot is after hitting 100,000 views per video. Since the quality of the content you upload can influence how much you make, we recommend using Wondershare Filmora to edit your videos. The video editing software comes with fantastic features for creating highly engaging videos.