"2024 Approved Quick Guide Embedding Time Markers on YouTube Videos (Desktop/Mobile)"

"2024 Approved Quick Guide Embedding Time Markers on YouTube Videos (Desktop/Mobile)"

Thomas Lv13
  2024-05-31 12:44:36 2024-05-31 12:44:36 Created   2024-06-01 12:44:36 2024-06-01 12:44:36 Updated    

Quick Guide: Embedding Time Markers on YouTube Videos (Desktop/Mobile)

How to Add Timestamps on YouTube Video Link?

author avatar

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

youtube timestamps in google serp

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

  1. Open the YouTube video on your desktop that you want to share.
  2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
  3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

youtube timestamps link

  1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
  2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

  1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
  2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

  1. Visit YouTube and open the video you want to add Timestamp link to.
  2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
  3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

get youtube timestamps link

  1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

  1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
  2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

share parts of YouTube video

  1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
  2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

create vib with YouTube videos

  1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
  2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
  3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
  4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

  1. Go to YouTube and select the video you want to share.
  2. Move through the progress bar of the video to reach the key part and click on the Share button.
  3. A pop-up menu appears, highlight the URL and click on the Copy button.
  4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

  1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
  2. Edit the description by clicking on the Edit Video button.
  3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

add chapters to YouTube description

  1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

youtube timestamps in google serp

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

  1. Open the YouTube video on your desktop that you want to share.
  2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
  3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

youtube timestamps link

  1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
  2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

  1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
  2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

  1. Visit YouTube and open the video you want to add Timestamp link to.
  2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
  3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

get youtube timestamps link

  1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

  1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
  2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

share parts of YouTube video

  1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
  2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

create vib with YouTube videos

  1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
  2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
  3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
  4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

  1. Go to YouTube and select the video you want to share.
  2. Move through the progress bar of the video to reach the key part and click on the Share button.
  3. A pop-up menu appears, highlight the URL and click on the Copy button.
  4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

  1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
  2. Edit the description by clicking on the Edit Video button.
  3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

add chapters to YouTube description

  1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

youtube timestamps in google serp

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

  1. Open the YouTube video on your desktop that you want to share.
  2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
  3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

youtube timestamps link

  1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
  2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

  1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
  2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

  1. Visit YouTube and open the video you want to add Timestamp link to.
  2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
  3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

get youtube timestamps link

  1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

  1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
  2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

share parts of YouTube video

  1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
  2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

create vib with YouTube videos

  1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
  2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
  3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
  4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

  1. Go to YouTube and select the video you want to share.
  2. Move through the progress bar of the video to reach the key part and click on the Share button.
  3. A pop-up menu appears, highlight the URL and click on the Copy button.
  4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

  1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
  2. Edit the description by clicking on the Edit Video button.
  3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

add chapters to YouTube description

  1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

It is a well-known fact that internet users have a short interest span, about just eight seconds. This attention span applies to all internet platforms including YouTube. YouTube is the second largest and most visited search engine after Google. It provides users with information through engaging and eye-catchy videos. However, certain videos are longer where only a particular section of the video holds the important information. Viewers tend to skip the long videos and if you do not want this to happen to you, you can link to that specific part on your video adding value for your channel viewers with a link known as the YouTube Timestamp link.

When you have a Timestamp link on your video, you can help your viewers directly reach the specific time in the video. This helps avoid the viewers from losing interest or to search for the key part in your video themselves.

Here in this article, we will explain Timestamp links, how to add Timestamp to YouTube video links, and what are the benefits of Timestamp.

In this fast-paced world where viewers have limited time at hand, YouTube Timestamp links are extremely helpful. These links are anchor text or video hyperlinks found either in the description beneath the video or at the video link end.

youtube timestamps in google serp

The Timestamps links allow you to put a link to a key moment in your YouTube video allowing the viewers and subscribers to view the video at the precise time specified. Your YouTube video maybe half an hour long or maybe your users do not have the time now or forget to later watch your video, but when you add Timestamp to the YouTube link, you provide them ways to get to the content quickly enhancing the user experience.

In addition to this, you can even provide a reference in minutes and hours where necessary. The YouTube Timestamp link acts as a guide that directs viewers to the part of the video, which is most relevant to them without having to watch the entire video.

In the following section, I will show you how to add timestamp to YouTube video link in several ways.

Use YouTube’s Share Feature

Using YouTube’s share feature is the simplest way to add Timestamp to YouTube videos. Here are easy steps to follow to do this.

  1. Open the YouTube video on your desktop that you want to share.
  2. Play the video or navigate the timeline and stop at the key moment you wish to apply the timestamp to.
  3. Now click on the Share button, a pop-up will appear. Under the URL, you will see a small box indicating Start at. The Timestamp is generated automatically, but you can adjust it.

youtube timestamps link

  1. Copy the updated URL with Timestamp to share the video or click on the social sharing icons to do so.
  2. When your viewers click on this URL, the video will begin at the specified Timestamp.

Use the Browser URL to add Timestamp manually

You can add Timestamp manually as well. Follow the step-by-step guide below to add a Timestamp manually.

  1. Open your YouTube video in a browser on your desktop and then find the URL in the browser’s address bar.
  2. Enter the specific time you want the viewers to watch the video from at the end of the video URL.

You can add time manually in two ways depending on the URL.

?t=As or

&t=As

“youtu.be/” Format

If your YouTube video link is a youtu.be format, then just add ?t=As at the end of the video link. The A denotes the seconds at which you want the viewer to watch your video. The time can also be specified in minutes and seconds and when you want to do that just add ?t=AmBs. For instance, ?t=2m40s.

“youtube.com/” Format

When your YouTube video link has a youtube.com format, the adjustment starts with an ampersand. &t=As or &t=AmBs is what you can use. If you are looking to add the Timestamp at 2m40s, just add “&t=2m40s at the end of the video URL.

Whenever anybody uses the URL with Timestamp, the video will start from the specified time.

However, when adding a Timestamp manually, always leave include whole numbers. For example, if the time starts at 4m, use 4 and not 04.

Copy video URL at current time

You can use YouTube’s built-in feature to share the key parts of your YouTube video. Follow the steps here.

  1. Visit YouTube and open the video you want to add Timestamp link to.
  2. Play the video or navigate the timeline to reach the specific part you like to use in Timestamp.
  3. Now either press Ctrl + click or right-click anywhere on the video. A pop-up opens where you can see various texts, click on the Copy video URL at current time and share the link.

get youtube timestamps link

  1. Anyone who clicks on this link will be instantly transported to the exact segment of your YouTube video.

The above-mentioned methods to add and send YouTube link with timestamp are quick and easy, but they have a few limitations. If you need more control and share highlighted parts of YouTube video without cutting the video, you need to use a third-party tool known as Vibby.

Vibby allows you to not only share specific parts of videos from YouTube but other platforms as well like Vimeo and Twitch. With the tool, you can clip multiple sections of the video and share them with others.

  1. To get started, signup either with mail, Google, Twitter, Facebook, or Twitch account.
  2. Once signed in, go to Create vib at the top left corner and then paste the URL of the YouTube video you would like to share and then click on the Start button.

share parts of YouTube video

  1. Your video will load in the Vibby editor, now click on Highlight the parts to share.
  2. Here you will see the Start highlight button, jump 5-sec option, option to switch between HD and SD video quality, and volume control button. Navigate to the part you want to share and click on Start highlight.

create vib with YouTube videos

  1. When you reach the end of the part, click on Finish highlight. Repeat the process to highlight multiple parts of the video. All the highlighted parts will appear in a list on the right side of the screen.
  2. Add a description to each part and format it, you have the option to preview before hitting the Save vib button.
  3. Name the vib and assign a category and then publish it to Vibby or make it a private vib.
  4. You get a dedicated link to your vib with the ability to embed it on your website or blog.

In this way, you can share the highlights of the YouTube video or Vimeo video easily.

Linking to specific YouTube Timestamp Link is straightforward on both iPhone and Android.

  1. Go to YouTube and select the video you want to share.
  2. Move through the progress bar of the video to reach the key part and click on the Share button.
  3. A pop-up menu appears, highlight the URL and click on the Copy button.
  4. Paste the URL and manually add the Timestamp using the steps mentioned in add a Timestamp manually.

Part 5: Is Timestamp Beneficial for your Video?

Timestamping your YouTube videos may decrease the watch time, but it enhances the user experience, and they want to see more of your videos. Apart from this, adding Timestamps to your videos make your videos discoverable through Google search. YouTube and Google will reward you for the videos in form of a high search engine ranking.

Adding a YouTube Timestamp link in your video description is easy. Here are the steps to do so.

  1. Go to your YouTube channel and select the video you want to add Timestamp to and then navigate to the description below it.
  2. Edit the description by clicking on the Edit Video button.
  3. You are redirected to the Video Details page. Here write 0:00 at the first part of the timecode, and then continue with the time of the key part of the video you want to add the Timestamp to in 2:40 format. You can add more Timestamp as well and then click on the Save button.

add chapters to YouTube description

  1. Reload the video page and you will see auto-generated Timestamp Links at the specific time you provided in the description.

Note: You need to add at least three timestamps which are 10 seconds or longer in order to add timestamps successfully.

Conclusion

As much as possible YouTubers want to make videos short and to the point. However, if a video needs to be longer, you can still help users navigate through to find what is important to them by adding Timestamp to YouTube link or Timestamp the YouTube descriptions. This can help your viewers jump straight to the interesting part in the video, rather than viewing the entire video saving their time and boost user experience.

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Transform Your Content: 3 Effective Techniques for YouTube Reaction Magic

How to Make a YouTube Reaction Video?

author avatar

Richard Bennett

Mar 27, 2024• Proven solutions

Sharing ideas and opinions on virtually any topic you can think of with millions of people around the world is arguably one of the greatest benefits YouTube gives to content creators. Even so, building your channel exclusively around reaction videos may prove to be difficult, but this doesn’t mean that you can’t use this type of video to comment on what other YouTubers are saying.

The process of making a YouTube reaction video is not overly technical, although you will have to decide which video editing technique you are going to use to make a reaction video. That is why in this article we are going to take a look at different ways to make a YouTube reaction video.

How to Make a Reaction Video for Your YouTube Channel? [3 Ways]

Using the footage without the consent of the copyright owner is punishable by the law, which means that you can only include the footage in a reaction video if you have the owner’s consent. Consequently, the selection of videos you can comment on is going to be limited, since it is entirely up to the creator of the video if they are going to give you permission to use their footage in your reaction video.

You can use the following video editing techniques, once you have access to the video you would like to comment on.

Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora

Video editing software, like Filmora , can also be used to create YouTube reaction videos, but you must have all the footage you would like to include in that video before you can start putting it together.

The first step is to create a new project in Filmora and then import the media assets into the editor. Besides video clips, you can also add music, pictures, or create opening titles and end credits for your reaction video.

Download Filmora Win Version Download Filmora Mac Version

Place the video you’re reacting to on a video track on the timeline and then add the video of your reaction to the timeline that is directly above the one to which you added the first video clip. Click on the top video in the preview window and use the handles that are positioned around the edges of the video to adjust its size.

If you would like to change the on-screen position of the overlay clip, you should simply click on it and drag it to the new location within the preview window.

Create reaction video with Filmora Picture in Picture feature

Filmora offers more than sixty motion effects, hundreds of transitions, and visual effects that can make your reaction video more visually appealing to the audience.

Filmora compositing with Blending modes

Moreover, Filmora video editing software offers a variety of blending modes, and it lets you control the opacity of the overlay video so that you can make it more transparent. Whether or not you are going to use these options depends on the footage you’re working with and the demands of a particular project.

Pros of using the Picture in Picture feature to make reaction videos in Filmora: You can place and adjust the videos with more customizable options. Get more tips about Making a PIP video in Filmora .

Method 2: Create several reaction windows with the Split Screen feature

Besides the Picture-in-Picture option, Filmora also enables you to play two or more videos simultaneously with Split Screen templates. Drag and drop the template you want to use in your reaction video to the timeline and click on the Enable Split Screen Animation tick box if you want to use the template without animations.

create reaction video with Filmora Split Screen Templates

Afterward, you should drag the video clips from the Media tab and drop them onto the section of the preview window where you want them to be located. Keep in mind that you cannot add more than six videos to a split-screen template.

Filmora Edit Reaction Video with Split Screen Video

All videos you add to a split-screen template can be edited, and you just have to click on them if you want to adjust their sizes, enhance colors, mute their audio tracks or add a new audio file to the template.

Check the details about How to make a split-screen video step by step.

Pros of using Split-screen template to make reaction video in Filmora: various templates for creating stylish video side by side easily.

Download Filmora Win Version Download Filmora Mac Version

Method 3: Create A YouTube Reaction Video with AI Portrait

With the human segmentation effect in AI Portrait, you can now blend the reaction video in a more natural way. The human segmentation effect will isolate people from the background, you can use any background in the video.

Note: You can use this feature after version after V 10.5 for Windows, and V 10.4 for Mac. Click the button below to get the latest version of Filmora on your desktop.

Download Filmora Win Version Download Filmora Mac Version

Step 1: Import the videos to the media library, and then drag the background video to the first video track, and the reaction video to the track above.

import reaction videos to Filmora

Step 2: Go to the Effects tab at the top, and click the AI Portrait category, and then you will see many effects such as Human Segmentation, Human Pixelate, Human Noise, and lighting flash. Here, drag and drop the Human segmentation effect to the reaction video.

make reaction video: remove video background

Step 3: Select the reaction video in the timeline, and then adjust its size and position by dragging it on the preview window. See, the reaction video is fine blended with the background video.

adjust reaction video size

Step 4: That’s the basic editing of making a reaction video. You can also add the neon or flashing effect to the video. If everything goes well, click Export and save the video.

add neon flash effects to reaction video

You can find out more details about using the AI Portrait effect to make a reaction video .

All videos you can find on YouTube are protected by intellectual property regulations, and you can’t use them without the copyright owner’s permission. The only way to avoid being absolutely sure that your reaction video isn’t violating the law is to contact the video creator and ask for permission to use their intellectual property. However, most YouTubers are reluctant to let others download and edit their videos unless they already have a large fan base.

In case you’re granted permission to comment on a video, you have nothing to worry about. However, if you don’t get the permission you’re all the money the reaction video generates will go to the copyright owner or you will be forced to delete the video from your channel. There are still a few things you can do, even if you don’t get permission to use the video you would like to comment on.

Muting the video’s audio or altering its pitch will make it more difficult for YouTube’s bots to detect copyright infringement, although this method may not always work. In addition, you can play a video for up to thirty seconds, then comment on that segment, and then play another segment of that video.

There is no way of saying whether any of these editing tricks are going to help you avoid a copyright claim, and you should only use them if you have no other option.

Conclusion

Anyone can master the technical aspects of making a reaction video, but the topics you react to need to be related to the general topic your channel covers. What’s more, the idea of your reaction video has to be relevant for your audience if you want to attract their attention. Which video editing techniques are you using to make a YouTube reaction video?

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

Sharing ideas and opinions on virtually any topic you can think of with millions of people around the world is arguably one of the greatest benefits YouTube gives to content creators. Even so, building your channel exclusively around reaction videos may prove to be difficult, but this doesn’t mean that you can’t use this type of video to comment on what other YouTubers are saying.

The process of making a YouTube reaction video is not overly technical, although you will have to decide which video editing technique you are going to use to make a reaction video. That is why in this article we are going to take a look at different ways to make a YouTube reaction video.

How to Make a Reaction Video for Your YouTube Channel? [3 Ways]

Using the footage without the consent of the copyright owner is punishable by the law, which means that you can only include the footage in a reaction video if you have the owner’s consent. Consequently, the selection of videos you can comment on is going to be limited, since it is entirely up to the creator of the video if they are going to give you permission to use their footage in your reaction video.

You can use the following video editing techniques, once you have access to the video you would like to comment on.

Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora

Video editing software, like Filmora , can also be used to create YouTube reaction videos, but you must have all the footage you would like to include in that video before you can start putting it together.

The first step is to create a new project in Filmora and then import the media assets into the editor. Besides video clips, you can also add music, pictures, or create opening titles and end credits for your reaction video.

Download Filmora Win Version Download Filmora Mac Version

Place the video you’re reacting to on a video track on the timeline and then add the video of your reaction to the timeline that is directly above the one to which you added the first video clip. Click on the top video in the preview window and use the handles that are positioned around the edges of the video to adjust its size.

If you would like to change the on-screen position of the overlay clip, you should simply click on it and drag it to the new location within the preview window.

Create reaction video with Filmora Picture in Picture feature

Filmora offers more than sixty motion effects, hundreds of transitions, and visual effects that can make your reaction video more visually appealing to the audience.

Filmora compositing with Blending modes

Moreover, Filmora video editing software offers a variety of blending modes, and it lets you control the opacity of the overlay video so that you can make it more transparent. Whether or not you are going to use these options depends on the footage you’re working with and the demands of a particular project.

Pros of using the Picture in Picture feature to make reaction videos in Filmora: You can place and adjust the videos with more customizable options. Get more tips about Making a PIP video in Filmora .

Method 2: Create several reaction windows with the Split Screen feature

Besides the Picture-in-Picture option, Filmora also enables you to play two or more videos simultaneously with Split Screen templates. Drag and drop the template you want to use in your reaction video to the timeline and click on the Enable Split Screen Animation tick box if you want to use the template without animations.

create reaction video with Filmora Split Screen Templates

Afterward, you should drag the video clips from the Media tab and drop them onto the section of the preview window where you want them to be located. Keep in mind that you cannot add more than six videos to a split-screen template.

Filmora Edit Reaction Video with Split Screen Video

All videos you add to a split-screen template can be edited, and you just have to click on them if you want to adjust their sizes, enhance colors, mute their audio tracks or add a new audio file to the template.

Check the details about How to make a split-screen video step by step.

Pros of using Split-screen template to make reaction video in Filmora: various templates for creating stylish video side by side easily.

Download Filmora Win Version Download Filmora Mac Version

Method 3: Create A YouTube Reaction Video with AI Portrait

With the human segmentation effect in AI Portrait, you can now blend the reaction video in a more natural way. The human segmentation effect will isolate people from the background, you can use any background in the video.

Note: You can use this feature after version after V 10.5 for Windows, and V 10.4 for Mac. Click the button below to get the latest version of Filmora on your desktop.

Download Filmora Win Version Download Filmora Mac Version

Step 1: Import the videos to the media library, and then drag the background video to the first video track, and the reaction video to the track above.

import reaction videos to Filmora

Step 2: Go to the Effects tab at the top, and click the AI Portrait category, and then you will see many effects such as Human Segmentation, Human Pixelate, Human Noise, and lighting flash. Here, drag and drop the Human segmentation effect to the reaction video.

make reaction video: remove video background

Step 3: Select the reaction video in the timeline, and then adjust its size and position by dragging it on the preview window. See, the reaction video is fine blended with the background video.

adjust reaction video size

Step 4: That’s the basic editing of making a reaction video. You can also add the neon or flashing effect to the video. If everything goes well, click Export and save the video.

add neon flash effects to reaction video

You can find out more details about using the AI Portrait effect to make a reaction video .

All videos you can find on YouTube are protected by intellectual property regulations, and you can’t use them without the copyright owner’s permission. The only way to avoid being absolutely sure that your reaction video isn’t violating the law is to contact the video creator and ask for permission to use their intellectual property. However, most YouTubers are reluctant to let others download and edit their videos unless they already have a large fan base.

In case you’re granted permission to comment on a video, you have nothing to worry about. However, if you don’t get the permission you’re all the money the reaction video generates will go to the copyright owner or you will be forced to delete the video from your channel. There are still a few things you can do, even if you don’t get permission to use the video you would like to comment on.

Muting the video’s audio or altering its pitch will make it more difficult for YouTube’s bots to detect copyright infringement, although this method may not always work. In addition, you can play a video for up to thirty seconds, then comment on that segment, and then play another segment of that video.

There is no way of saying whether any of these editing tricks are going to help you avoid a copyright claim, and you should only use them if you have no other option.

Conclusion

Anyone can master the technical aspects of making a reaction video, but the topics you react to need to be related to the general topic your channel covers. What’s more, the idea of your reaction video has to be relevant for your audience if you want to attract their attention. Which video editing techniques are you using to make a YouTube reaction video?

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

Sharing ideas and opinions on virtually any topic you can think of with millions of people around the world is arguably one of the greatest benefits YouTube gives to content creators. Even so, building your channel exclusively around reaction videos may prove to be difficult, but this doesn’t mean that you can’t use this type of video to comment on what other YouTubers are saying.

The process of making a YouTube reaction video is not overly technical, although you will have to decide which video editing technique you are going to use to make a reaction video. That is why in this article we are going to take a look at different ways to make a YouTube reaction video.

How to Make a Reaction Video for Your YouTube Channel? [3 Ways]

Using the footage without the consent of the copyright owner is punishable by the law, which means that you can only include the footage in a reaction video if you have the owner’s consent. Consequently, the selection of videos you can comment on is going to be limited, since it is entirely up to the creator of the video if they are going to give you permission to use their footage in your reaction video.

You can use the following video editing techniques, once you have access to the video you would like to comment on.

Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora

Video editing software, like Filmora , can also be used to create YouTube reaction videos, but you must have all the footage you would like to include in that video before you can start putting it together.

The first step is to create a new project in Filmora and then import the media assets into the editor. Besides video clips, you can also add music, pictures, or create opening titles and end credits for your reaction video.

Download Filmora Win Version Download Filmora Mac Version

Place the video you’re reacting to on a video track on the timeline and then add the video of your reaction to the timeline that is directly above the one to which you added the first video clip. Click on the top video in the preview window and use the handles that are positioned around the edges of the video to adjust its size.

If you would like to change the on-screen position of the overlay clip, you should simply click on it and drag it to the new location within the preview window.

Create reaction video with Filmora Picture in Picture feature

Filmora offers more than sixty motion effects, hundreds of transitions, and visual effects that can make your reaction video more visually appealing to the audience.

Filmora compositing with Blending modes

Moreover, Filmora video editing software offers a variety of blending modes, and it lets you control the opacity of the overlay video so that you can make it more transparent. Whether or not you are going to use these options depends on the footage you’re working with and the demands of a particular project.

Pros of using the Picture in Picture feature to make reaction videos in Filmora: You can place and adjust the videos with more customizable options. Get more tips about Making a PIP video in Filmora .

Method 2: Create several reaction windows with the Split Screen feature

Besides the Picture-in-Picture option, Filmora also enables you to play two or more videos simultaneously with Split Screen templates. Drag and drop the template you want to use in your reaction video to the timeline and click on the Enable Split Screen Animation tick box if you want to use the template without animations.

create reaction video with Filmora Split Screen Templates

Afterward, you should drag the video clips from the Media tab and drop them onto the section of the preview window where you want them to be located. Keep in mind that you cannot add more than six videos to a split-screen template.

Filmora Edit Reaction Video with Split Screen Video

All videos you add to a split-screen template can be edited, and you just have to click on them if you want to adjust their sizes, enhance colors, mute their audio tracks or add a new audio file to the template.

Check the details about How to make a split-screen video step by step.

Pros of using Split-screen template to make reaction video in Filmora: various templates for creating stylish video side by side easily.

Download Filmora Win Version Download Filmora Mac Version

Method 3: Create A YouTube Reaction Video with AI Portrait

With the human segmentation effect in AI Portrait, you can now blend the reaction video in a more natural way. The human segmentation effect will isolate people from the background, you can use any background in the video.

Note: You can use this feature after version after V 10.5 for Windows, and V 10.4 for Mac. Click the button below to get the latest version of Filmora on your desktop.

Download Filmora Win Version Download Filmora Mac Version

Step 1: Import the videos to the media library, and then drag the background video to the first video track, and the reaction video to the track above.

import reaction videos to Filmora

Step 2: Go to the Effects tab at the top, and click the AI Portrait category, and then you will see many effects such as Human Segmentation, Human Pixelate, Human Noise, and lighting flash. Here, drag and drop the Human segmentation effect to the reaction video.

make reaction video: remove video background

Step 3: Select the reaction video in the timeline, and then adjust its size and position by dragging it on the preview window. See, the reaction video is fine blended with the background video.

adjust reaction video size

Step 4: That’s the basic editing of making a reaction video. You can also add the neon or flashing effect to the video. If everything goes well, click Export and save the video.

add neon flash effects to reaction video

You can find out more details about using the AI Portrait effect to make a reaction video .

All videos you can find on YouTube are protected by intellectual property regulations, and you can’t use them without the copyright owner’s permission. The only way to avoid being absolutely sure that your reaction video isn’t violating the law is to contact the video creator and ask for permission to use their intellectual property. However, most YouTubers are reluctant to let others download and edit their videos unless they already have a large fan base.

In case you’re granted permission to comment on a video, you have nothing to worry about. However, if you don’t get the permission you’re all the money the reaction video generates will go to the copyright owner or you will be forced to delete the video from your channel. There are still a few things you can do, even if you don’t get permission to use the video you would like to comment on.

Muting the video’s audio or altering its pitch will make it more difficult for YouTube’s bots to detect copyright infringement, although this method may not always work. In addition, you can play a video for up to thirty seconds, then comment on that segment, and then play another segment of that video.

There is no way of saying whether any of these editing tricks are going to help you avoid a copyright claim, and you should only use them if you have no other option.

Conclusion

Anyone can master the technical aspects of making a reaction video, but the topics you react to need to be related to the general topic your channel covers. What’s more, the idea of your reaction video has to be relevant for your audience if you want to attract their attention. Which video editing techniques are you using to make a YouTube reaction video?

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

Richard Bennett

Mar 27, 2024• Proven solutions

Sharing ideas and opinions on virtually any topic you can think of with millions of people around the world is arguably one of the greatest benefits YouTube gives to content creators. Even so, building your channel exclusively around reaction videos may prove to be difficult, but this doesn’t mean that you can’t use this type of video to comment on what other YouTubers are saying.

The process of making a YouTube reaction video is not overly technical, although you will have to decide which video editing technique you are going to use to make a reaction video. That is why in this article we are going to take a look at different ways to make a YouTube reaction video.

How to Make a Reaction Video for Your YouTube Channel? [3 Ways]

Using the footage without the consent of the copyright owner is punishable by the law, which means that you can only include the footage in a reaction video if you have the owner’s consent. Consequently, the selection of videos you can comment on is going to be limited, since it is entirely up to the creator of the video if they are going to give you permission to use their footage in your reaction video.

You can use the following video editing techniques, once you have access to the video you would like to comment on.

Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora

Video editing software, like Filmora , can also be used to create YouTube reaction videos, but you must have all the footage you would like to include in that video before you can start putting it together.

The first step is to create a new project in Filmora and then import the media assets into the editor. Besides video clips, you can also add music, pictures, or create opening titles and end credits for your reaction video.

Download Filmora Win Version Download Filmora Mac Version

Place the video you’re reacting to on a video track on the timeline and then add the video of your reaction to the timeline that is directly above the one to which you added the first video clip. Click on the top video in the preview window and use the handles that are positioned around the edges of the video to adjust its size.

If you would like to change the on-screen position of the overlay clip, you should simply click on it and drag it to the new location within the preview window.

Create reaction video with Filmora Picture in Picture feature

Filmora offers more than sixty motion effects, hundreds of transitions, and visual effects that can make your reaction video more visually appealing to the audience.

Filmora compositing with Blending modes

Moreover, Filmora video editing software offers a variety of blending modes, and it lets you control the opacity of the overlay video so that you can make it more transparent. Whether or not you are going to use these options depends on the footage you’re working with and the demands of a particular project.

Pros of using the Picture in Picture feature to make reaction videos in Filmora: You can place and adjust the videos with more customizable options. Get more tips about Making a PIP video in Filmora .

Method 2: Create several reaction windows with the Split Screen feature

Besides the Picture-in-Picture option, Filmora also enables you to play two or more videos simultaneously with Split Screen templates. Drag and drop the template you want to use in your reaction video to the timeline and click on the Enable Split Screen Animation tick box if you want to use the template without animations.

create reaction video with Filmora Split Screen Templates

Afterward, you should drag the video clips from the Media tab and drop them onto the section of the preview window where you want them to be located. Keep in mind that you cannot add more than six videos to a split-screen template.

Filmora Edit Reaction Video with Split Screen Video

All videos you add to a split-screen template can be edited, and you just have to click on them if you want to adjust their sizes, enhance colors, mute their audio tracks or add a new audio file to the template.

Check the details about How to make a split-screen video step by step.

Pros of using Split-screen template to make reaction video in Filmora: various templates for creating stylish video side by side easily.

Download Filmora Win Version Download Filmora Mac Version

Method 3: Create A YouTube Reaction Video with AI Portrait

With the human segmentation effect in AI Portrait, you can now blend the reaction video in a more natural way. The human segmentation effect will isolate people from the background, you can use any background in the video.

Note: You can use this feature after version after V 10.5 for Windows, and V 10.4 for Mac. Click the button below to get the latest version of Filmora on your desktop.

Download Filmora Win Version Download Filmora Mac Version

Step 1: Import the videos to the media library, and then drag the background video to the first video track, and the reaction video to the track above.

import reaction videos to Filmora

Step 2: Go to the Effects tab at the top, and click the AI Portrait category, and then you will see many effects such as Human Segmentation, Human Pixelate, Human Noise, and lighting flash. Here, drag and drop the Human segmentation effect to the reaction video.

make reaction video: remove video background

Step 3: Select the reaction video in the timeline, and then adjust its size and position by dragging it on the preview window. See, the reaction video is fine blended with the background video.

adjust reaction video size

Step 4: That’s the basic editing of making a reaction video. You can also add the neon or flashing effect to the video. If everything goes well, click Export and save the video.

add neon flash effects to reaction video

You can find out more details about using the AI Portrait effect to make a reaction video .

All videos you can find on YouTube are protected by intellectual property regulations, and you can’t use them without the copyright owner’s permission. The only way to avoid being absolutely sure that your reaction video isn’t violating the law is to contact the video creator and ask for permission to use their intellectual property. However, most YouTubers are reluctant to let others download and edit their videos unless they already have a large fan base.

In case you’re granted permission to comment on a video, you have nothing to worry about. However, if you don’t get the permission you’re all the money the reaction video generates will go to the copyright owner or you will be forced to delete the video from your channel. There are still a few things you can do, even if you don’t get permission to use the video you would like to comment on.

Muting the video’s audio or altering its pitch will make it more difficult for YouTube’s bots to detect copyright infringement, although this method may not always work. In addition, you can play a video for up to thirty seconds, then comment on that segment, and then play another segment of that video.

There is no way of saying whether any of these editing tricks are going to help you avoid a copyright claim, and you should only use them if you have no other option.

Conclusion

Anyone can master the technical aspects of making a reaction video, but the topics you react to need to be related to the general topic your channel covers. What’s more, the idea of your reaction video has to be relevant for your audience if you want to attract their attention. Which video editing techniques are you using to make a YouTube reaction video?

Download Win VersionDownload Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

author avatar

Richard Bennett

Richard Bennett is a writer and a lover of all things video.

Follow @Richard Bennett

  • Title: "2024 Approved Quick Guide Embedding Time Markers on YouTube Videos (Desktop/Mobile)"
  • Author: Thomas
  • Created at : 2024-05-31 12:44:36
  • Updated at : 2024-06-01 12:44:36
  • Link: https://youtube-help.techidaily.com/2024-approved-quick-guide-embedding-time-markers-on-youtube-videos-desktopmobile/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
"2024 Approved Quick Guide Embedding Time Markers on YouTube Videos (Desktop/Mobile)"
  1. Quick Guide: Embedding Time Markers on YouTube Videos (Desktop/Mobile)
  • How to Add Timestamps on YouTube Video Link?
    1. Part 1: What is YouTube Timestamp Links
    2. Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?
    3. Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp
    4. Part 4: How to Get YouTube Timestamp Link on iPhone and Android?
    5. Part 5: Is Timestamp Beneficial for your Video?
    6. Bonus: How to Add YouTube Timestamp Link in YouTube Video Description
    7. Part 1: What is YouTube Timestamp Links
    8. Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?
    9. Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp
    10. Part 4: How to Get YouTube Timestamp Link on iPhone and Android?
    11. Part 5: Is Timestamp Beneficial for your Video?
    12. Bonus: How to Add YouTube Timestamp Link in YouTube Video Description
    13. Part 1: What is YouTube Timestamp Links
    14. Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?
    15. Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp
    16. Part 4: How to Get YouTube Timestamp Link on iPhone and Android?
    17. Part 5: Is Timestamp Beneficial for your Video?
    18. Bonus: How to Add YouTube Timestamp Link in YouTube Video Description
    19. Part 1: What is YouTube Timestamp Links
    20. Part 2: How to Add a Timestamp to YouTube Video Link on Desktop?
    21. Part 3: How to Share Specific Parts of Videos with Vibby and Get YouTube Link with Timestamp
    22. Part 4: How to Get YouTube Timestamp Link on iPhone and Android?
    23. Part 5: Is Timestamp Beneficial for your Video?
    24. Bonus: How to Add YouTube Timestamp Link in YouTube Video Description
    25. Transform Your Content: 3 Effective Techniques for YouTube Reaction Magic
  • How to Make a YouTube Reaction Video?
    1. How to Make a Reaction Video for Your YouTube Channel? [3 Ways]
      1. Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora
      2. Method 2: Create several reaction windows with the Split Screen feature
      3. Method 3: Create A YouTube Reaction Video with AI Portrait
    2. How to Avoid Copyright Infringements While Making a YouTube Reaction Video
    3. How to Make a Reaction Video for Your YouTube Channel? [3 Ways]
      1. Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora
      2. Method 2: Create several reaction windows with the Split Screen feature
      3. Method 3: Create A YouTube Reaction Video with AI Portrait
    4. How to Avoid Copyright Infringements While Making a YouTube Reaction Video
    5. How to Make a Reaction Video for Your YouTube Channel? [3 Ways]
      1. Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora
      2. Method 2: Create several reaction windows with the Split Screen feature
      3. Method 3: Create A YouTube Reaction Video with AI Portrait
    6. How to Avoid Copyright Infringements While Making a YouTube Reaction Video
    7. How to Make a Reaction Video for Your YouTube Channel? [3 Ways]
      1. Method 1: Making a reaction video with the Picture-in-Picture feature in Filmora
      2. Method 2: Create several reaction windows with the Split Screen feature
      3. Method 3: Create A YouTube Reaction Video with AI Portrait
    8. How to Avoid Copyright Infringements While Making a YouTube Reaction Video