"Mastering Recording Secrets for Top-Notch Audio for 2024"
Mastering Recording: Secrets for Top-Notch Audio
10 Recording Tips for Recording Audio with High Quality
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
1. Silence everything you don’t want your microphone to record
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
6. Adjust your levels
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
10. Record Ambient Sound
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
1. Silence everything you don’t want your microphone to record
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
6. Adjust your levels
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
10. Record Ambient Sound
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
1. Silence everything you don’t want your microphone to record
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
6. Adjust your levels
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
10. Record Ambient Sound
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
Getting the best sound for your recording is not as simplistic as buying an expensive microphone. There are many different things you can do to record your audio more clearly. Here are 10 recording tips to record high-quality audio.
1. Silence everything you don’t want your microphone to record
2. Put your mobile phone in airplane mode
3. Minimize echo
4. Block wind from reaching your microphone
5. Upgrade your microphone
6. Adjust your levels
7. Start with a sound cue if you’re planning to do some syncing in post
8. Get close to the sound
9. ADR
10. Record Ambient Sound
Bonus Tip-Record Your Audio with Wondershare Filmora
Wondershare Filmora has great recording features that enable you to record screen , voiceover, and webcam. Just connect the recording device to your computer, and start the recording in Wondershare Filmora and you will get high-quality audio. And you can also easily pick a song from the royalty-free music library on Wondershare Filmora. These audio features on Filmora are rare and very simple to use, you only need to click a few times and your video will have a new sound and background song.
1. Silence everything you don’t want your microphone to record
When you’re recording audio, you have to be more aware of the subtle sounds that drone on in your background. These sounds may include humming from machines with fans, buzzing from lights, and jingling from your pet’s collar. Observe your recording space and find ways to silence everything that you don’t want in your audio recording.
2. Put your mobile phone in airplane mode
Although it may be quite obvious to turn your phone’s ring tone off when you’re recording, it may not be as obvious to put your phone in airplane mode. When phones receive calls or perform searches as part of their background processes, they emit signals that can get picked up by your recording system. Avoid ruining good takes with unwanted sounds of phone signals by putting your phones in airplane mode.
3. Minimize echo
If you are recording yourself talk or sing, make sure to set up your recording space in a way where the sound projected from your voice bounces minimally off the walls and back to your microphone. Bare walls and hardwood floors will cause a lot of bouncing. Make use of materials that will absorb your sound rather than bounce it, like a thick rug or a comforter. If you want your voice to echo, that’s something you should do in post-production.
4. Block wind from reaching your microphone
Although it might not sound so loud and distracting to the naked ear, wind sounds terribly loud through a microphone recording and can cause your audio to clip (distortion of waveform due to output of sound exceeding maximum capacity or 0 dB point). This includes the “wind” that comes out of your mouth when you pronounce words starting with the letter “p.” Use pop filters, windscreens, and deadcats to block wind from reaching your microphone.
5. Upgrade your microphone
As much as you try to control all the noise in your surroundings, your greatest recording limitation will come from the hardware that you use. Improve your recordings by plugging in an external microphone into your camera’s microphone jack or record audio completely separately with a professional microphone.
Need help with deciding on a microphone to buy? Check out our recommended list of microphones.
6. Adjust your levels
Before pressing the record button, see how loudly your microphone picks up the sound you wish to record. Adjust your levels (sensitivity of your microphone) until the sound sits in between -6 dBs and -12dBs. This range gives the source of your sound some room to get louder without the recorded audio getting clipped. When you first listen to audio recorded within this range, it may sound very quiet. No need to worry though because you can increase the volume later in editing.
7. Start with a sound cue if you’re planning to do some syncing in post
If you’re recording separate audio that you plan to sync to your video later in editing, start your recording with a short and loud sound cue like a clap or a high pitched “beep” tone. Later, when you’re editing, it’ll be much easier for you to find the section where your video and additional audio match.
8. Get close to the sound
Unless you’re aiming to record ambient sound, bring your microphone close to the source of sound you are wanting to record. The closer your microphone is to the source of sound, the lower your sensitivity setting can be on your microphone. As a result of lowering your levels, sounds you are not meaning to record will also sound fainter.
9. ADR
When you need to record a scene in a loud setting where you have very little control over the noise, record additional vocals later and replace the original vocals through a process called automated dialogue replacement.
10. Record Ambient Sound
Remember to record ambient sound or “room tone.” You can use these recordings to fill in the blanks if you run out of audio and also smooth out parts of your audio where you hear pops, clicks, and other unwanted noise.
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Peeling Back the Curtain on YouTube’s Content Popularity Index
How Does YouTube Count Views? It’s Not as Simple as You Think
Richard Bennett
Oct 26, 2023• Proven solutions
How does YouTube count views? It’s not as simple as the number of clicks your video gets. If someone sits and refreshes your video over and over without letting it play for any significant time, those refreshes won’t be recorded as views. There is a lot more that goes into the calculation.
- Not Everyone Who Clicks Adds to Your View Count
- How Does YouTube Count Views
- How Does YouTube’s View Count Algorithm Work?
- Account Tracking Factors - Some Viewers Don’t Count
- The Skip & Skim
- Frozen YouTube View Counts
- The 301 Mark
Best YouTube Video Editor - Filmora
After you have created your YouTube channel, do you want to edit videos and upload your first video? Here we recommend using Filmora to easily edit YouTube videos.
You can use Filmora to make YouTube videos with built-in royalty-free audio. Filmora also can help you make YouTube intros. It includes more than 500 templates, transitions, effects, and text resources.
1. Not Everyone Who Clicks Adds to Your View Count
YouTube doesn’t provide a clear definition of what counts as a view, but we know that someone clicks on your video, and clicking right away doesn’t count. That’s how we know that watch time is a factor. Some studies conclude that a full 30 seconds need to be viewed to register as one view, but there is no way to know for sure.
2. How Does YouTube Count Views?
YouTube wants to be sure that views are coming from humans and not bots. So, during the first couple of hours after you publish a video, YouTube seems to be stricter about what they count. The views which are counted are the ones that YouTube believes to be legitimate. Sometimes, it ends up skipping legitimate views for the sake of discretion.
Once this window of time passes, it is likely that you will see the view counter start to update a lot more frequently. The counter could still revert to updating slower and more hesitantly, though, if YouTube’s algorithm thinks it’s detecting something fishy.
At times, your view count can even be frozen temporarily until the algorithm can validate the views you are receiving. This is done to ensure a fair and positive experience for everyone who creates content. View counts can be adjusted by the algorithm in either direction.
You May Also Like:
5 Tips To Get More Views With YouTube Optimization [Free Checklist] >>
3. How Does YouTube’s View Count Algorithm Work?
Termed by many as one of the most boggling algorithms of all time, it is really hard to decode the complete dynamics of the YouTube view count algorithm.
There are some tests you can run yourself to try to unpack it.
If you upload a video and then set it as unlisted it won’t get any public views so you can experiment by doing things like watching for different lengths of time and seeing what gets counted.
You’ll have to use a computer in a different location and make sure the account is not the same as the one you used to upload the video. Now, you need to watch the video for roughly 15 seconds. The key here is to keep it less than 30 seconds. You will see that the view did not add to the count. If you repeat this process on multiple computers at varying locations and with different accounts and you are likely to find the same result.
However, if you watch it for 30 seconds or longer it is likely that the count will go up.
We are adding ‘likely’ here because, despite this 30-second rule which has been decoded, there are other factors that might contribute to whether a view is counted as well as other automated scanning techniques at play.
Try to watch the same video numerous times in a single day. You will find that the count will add up at first, but after some time it will stop. YouTube knows that a lot of times people replay some videos over and over when they really enjoy them, and so they want to factor replays into their algorithm because they suggest quality. However, to avoid spam views, the counter will stop after a certain point.
4. Account Tracking Factors - Some Viewers Don’t Count
Something else that can affect whether a view is counted is the behavior of the account which watches it prior to landing on your video’s watch page. Sometimes, YouTube might feel that there is an increased chance a particular account is actually a bot, and then views from that account might not be added.
One way that YouTube might flag an account as a potential bot is if it is jumping between videos directly without navigating through recommendations, the search engine, or the account’s subscriber feed (how are they getting between these watch page URLs if they aren’t clicking on anything YouTube can record?). To add to it, if the viewer is watching each of the videos for almost 30 seconds exactly (or less) there is an increased probability that it is not a human but a bot (or a human watching the bare minimum as part of a view exchange program).
Any bot-like action will result in an account’s views do not be added to your view count.
5. The Skip & Skim
It’s not uncommon for viewers to watch a video for say five seconds, skip forwards a bit and watch for another ten seconds as they look for a specific part. It is hard to say whether skipping through a video, but watching a scattered 30 seconds, would count as a view or not.
6. Frozen YouTube View Counts
Sometimes YouTube will freeze a view count in order to check that it is accurate. When the count is unfrozen, the count may jump up as views are validated or it can go down if YouTube detects a problem.
You can use YouTube’s analytics reports to monitor an estimate of your potential views, but there is no assurance that this data will completely match your official view count.
7. The 301 Mark
You may have seen a lot of videos that have a stagnant count of 301 views. The algorithm behind YouTube’s view counting system believes that any video which has fetched higher than 300 views has the ability to impact people’s perception of quality on YouTube. They do not want the homepage to be crowded with artificially popular videos.
This is why view counts are often frozen at 301. The employees at YouTube then manually verify whether the views obtained so far are legitimate or fake. Once the employees are sure that the views are legit, the counter is unfrozen and you will see an upward swing.
During the period when the view count is frozen every legitimate view is still counted, just not added immediately. Once the YouTube team is sure that your videos are not getting fake traffic, your view count will be updated to include views that were registered during the frozen phase. However, YouTube says it won’t flag videos at 301 views anymore.
Conclusion
In short, we know YouTube expects a viewer to watch a video for around 30 seconds before it counts a view, that views from suspicious accounts are not counted, and that YouTube can decide to freeze your view count while they review your views. They are protecting the site from becoming saturated with videos that only look popular because of bots. Ultimately, ‘how does YouTube count views’ isn’t a question anyone but YouTube can answer for sure, but we do know it isn’t as simple as ‘a view is someone clicking on your video’.
If you want to engage your audience with cool effects and Filmora is the best choice to make a split-screen and green screen video for YouTubers. Download it now to have a try!
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
How does YouTube count views? It’s not as simple as the number of clicks your video gets. If someone sits and refreshes your video over and over without letting it play for any significant time, those refreshes won’t be recorded as views. There is a lot more that goes into the calculation.
- Not Everyone Who Clicks Adds to Your View Count
- How Does YouTube Count Views
- How Does YouTube’s View Count Algorithm Work?
- Account Tracking Factors - Some Viewers Don’t Count
- The Skip & Skim
- Frozen YouTube View Counts
- The 301 Mark
Best YouTube Video Editor - Filmora
After you have created your YouTube channel, do you want to edit videos and upload your first video? Here we recommend using Filmora to easily edit YouTube videos.
You can use Filmora to make YouTube videos with built-in royalty-free audio. Filmora also can help you make YouTube intros. It includes more than 500 templates, transitions, effects, and text resources.
1. Not Everyone Who Clicks Adds to Your View Count
YouTube doesn’t provide a clear definition of what counts as a view, but we know that someone clicks on your video, and clicking right away doesn’t count. That’s how we know that watch time is a factor. Some studies conclude that a full 30 seconds need to be viewed to register as one view, but there is no way to know for sure.
2. How Does YouTube Count Views?
YouTube wants to be sure that views are coming from humans and not bots. So, during the first couple of hours after you publish a video, YouTube seems to be stricter about what they count. The views which are counted are the ones that YouTube believes to be legitimate. Sometimes, it ends up skipping legitimate views for the sake of discretion.
Once this window of time passes, it is likely that you will see the view counter start to update a lot more frequently. The counter could still revert to updating slower and more hesitantly, though, if YouTube’s algorithm thinks it’s detecting something fishy.
At times, your view count can even be frozen temporarily until the algorithm can validate the views you are receiving. This is done to ensure a fair and positive experience for everyone who creates content. View counts can be adjusted by the algorithm in either direction.
You May Also Like:
5 Tips To Get More Views With YouTube Optimization [Free Checklist] >>
3. How Does YouTube’s View Count Algorithm Work?
Termed by many as one of the most boggling algorithms of all time, it is really hard to decode the complete dynamics of the YouTube view count algorithm.
There are some tests you can run yourself to try to unpack it.
If you upload a video and then set it as unlisted it won’t get any public views so you can experiment by doing things like watching for different lengths of time and seeing what gets counted.
You’ll have to use a computer in a different location and make sure the account is not the same as the one you used to upload the video. Now, you need to watch the video for roughly 15 seconds. The key here is to keep it less than 30 seconds. You will see that the view did not add to the count. If you repeat this process on multiple computers at varying locations and with different accounts and you are likely to find the same result.
However, if you watch it for 30 seconds or longer it is likely that the count will go up.
We are adding ‘likely’ here because, despite this 30-second rule which has been decoded, there are other factors that might contribute to whether a view is counted as well as other automated scanning techniques at play.
Try to watch the same video numerous times in a single day. You will find that the count will add up at first, but after some time it will stop. YouTube knows that a lot of times people replay some videos over and over when they really enjoy them, and so they want to factor replays into their algorithm because they suggest quality. However, to avoid spam views, the counter will stop after a certain point.
4. Account Tracking Factors - Some Viewers Don’t Count
Something else that can affect whether a view is counted is the behavior of the account which watches it prior to landing on your video’s watch page. Sometimes, YouTube might feel that there is an increased chance a particular account is actually a bot, and then views from that account might not be added.
One way that YouTube might flag an account as a potential bot is if it is jumping between videos directly without navigating through recommendations, the search engine, or the account’s subscriber feed (how are they getting between these watch page URLs if they aren’t clicking on anything YouTube can record?). To add to it, if the viewer is watching each of the videos for almost 30 seconds exactly (or less) there is an increased probability that it is not a human but a bot (or a human watching the bare minimum as part of a view exchange program).
Any bot-like action will result in an account’s views do not be added to your view count.
5. The Skip & Skim
It’s not uncommon for viewers to watch a video for say five seconds, skip forwards a bit and watch for another ten seconds as they look for a specific part. It is hard to say whether skipping through a video, but watching a scattered 30 seconds, would count as a view or not.
6. Frozen YouTube View Counts
Sometimes YouTube will freeze a view count in order to check that it is accurate. When the count is unfrozen, the count may jump up as views are validated or it can go down if YouTube detects a problem.
You can use YouTube’s analytics reports to monitor an estimate of your potential views, but there is no assurance that this data will completely match your official view count.
7. The 301 Mark
You may have seen a lot of videos that have a stagnant count of 301 views. The algorithm behind YouTube’s view counting system believes that any video which has fetched higher than 300 views has the ability to impact people’s perception of quality on YouTube. They do not want the homepage to be crowded with artificially popular videos.
This is why view counts are often frozen at 301. The employees at YouTube then manually verify whether the views obtained so far are legitimate or fake. Once the employees are sure that the views are legit, the counter is unfrozen and you will see an upward swing.
During the period when the view count is frozen every legitimate view is still counted, just not added immediately. Once the YouTube team is sure that your videos are not getting fake traffic, your view count will be updated to include views that were registered during the frozen phase. However, YouTube says it won’t flag videos at 301 views anymore.
Conclusion
In short, we know YouTube expects a viewer to watch a video for around 30 seconds before it counts a view, that views from suspicious accounts are not counted, and that YouTube can decide to freeze your view count while they review your views. They are protecting the site from becoming saturated with videos that only look popular because of bots. Ultimately, ‘how does YouTube count views’ isn’t a question anyone but YouTube can answer for sure, but we do know it isn’t as simple as ‘a view is someone clicking on your video’.
If you want to engage your audience with cool effects and Filmora is the best choice to make a split-screen and green screen video for YouTubers. Download it now to have a try!
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
How does YouTube count views? It’s not as simple as the number of clicks your video gets. If someone sits and refreshes your video over and over without letting it play for any significant time, those refreshes won’t be recorded as views. There is a lot more that goes into the calculation.
- Not Everyone Who Clicks Adds to Your View Count
- How Does YouTube Count Views
- How Does YouTube’s View Count Algorithm Work?
- Account Tracking Factors - Some Viewers Don’t Count
- The Skip & Skim
- Frozen YouTube View Counts
- The 301 Mark
Best YouTube Video Editor - Filmora
After you have created your YouTube channel, do you want to edit videos and upload your first video? Here we recommend using Filmora to easily edit YouTube videos.
You can use Filmora to make YouTube videos with built-in royalty-free audio. Filmora also can help you make YouTube intros. It includes more than 500 templates, transitions, effects, and text resources.
1. Not Everyone Who Clicks Adds to Your View Count
YouTube doesn’t provide a clear definition of what counts as a view, but we know that someone clicks on your video, and clicking right away doesn’t count. That’s how we know that watch time is a factor. Some studies conclude that a full 30 seconds need to be viewed to register as one view, but there is no way to know for sure.
2. How Does YouTube Count Views?
YouTube wants to be sure that views are coming from humans and not bots. So, during the first couple of hours after you publish a video, YouTube seems to be stricter about what they count. The views which are counted are the ones that YouTube believes to be legitimate. Sometimes, it ends up skipping legitimate views for the sake of discretion.
Once this window of time passes, it is likely that you will see the view counter start to update a lot more frequently. The counter could still revert to updating slower and more hesitantly, though, if YouTube’s algorithm thinks it’s detecting something fishy.
At times, your view count can even be frozen temporarily until the algorithm can validate the views you are receiving. This is done to ensure a fair and positive experience for everyone who creates content. View counts can be adjusted by the algorithm in either direction.
You May Also Like:
5 Tips To Get More Views With YouTube Optimization [Free Checklist] >>
3. How Does YouTube’s View Count Algorithm Work?
Termed by many as one of the most boggling algorithms of all time, it is really hard to decode the complete dynamics of the YouTube view count algorithm.
There are some tests you can run yourself to try to unpack it.
If you upload a video and then set it as unlisted it won’t get any public views so you can experiment by doing things like watching for different lengths of time and seeing what gets counted.
You’ll have to use a computer in a different location and make sure the account is not the same as the one you used to upload the video. Now, you need to watch the video for roughly 15 seconds. The key here is to keep it less than 30 seconds. You will see that the view did not add to the count. If you repeat this process on multiple computers at varying locations and with different accounts and you are likely to find the same result.
However, if you watch it for 30 seconds or longer it is likely that the count will go up.
We are adding ‘likely’ here because, despite this 30-second rule which has been decoded, there are other factors that might contribute to whether a view is counted as well as other automated scanning techniques at play.
Try to watch the same video numerous times in a single day. You will find that the count will add up at first, but after some time it will stop. YouTube knows that a lot of times people replay some videos over and over when they really enjoy them, and so they want to factor replays into their algorithm because they suggest quality. However, to avoid spam views, the counter will stop after a certain point.
4. Account Tracking Factors - Some Viewers Don’t Count
Something else that can affect whether a view is counted is the behavior of the account which watches it prior to landing on your video’s watch page. Sometimes, YouTube might feel that there is an increased chance a particular account is actually a bot, and then views from that account might not be added.
One way that YouTube might flag an account as a potential bot is if it is jumping between videos directly without navigating through recommendations, the search engine, or the account’s subscriber feed (how are they getting between these watch page URLs if they aren’t clicking on anything YouTube can record?). To add to it, if the viewer is watching each of the videos for almost 30 seconds exactly (or less) there is an increased probability that it is not a human but a bot (or a human watching the bare minimum as part of a view exchange program).
Any bot-like action will result in an account’s views do not be added to your view count.
5. The Skip & Skim
It’s not uncommon for viewers to watch a video for say five seconds, skip forwards a bit and watch for another ten seconds as they look for a specific part. It is hard to say whether skipping through a video, but watching a scattered 30 seconds, would count as a view or not.
6. Frozen YouTube View Counts
Sometimes YouTube will freeze a view count in order to check that it is accurate. When the count is unfrozen, the count may jump up as views are validated or it can go down if YouTube detects a problem.
You can use YouTube’s analytics reports to monitor an estimate of your potential views, but there is no assurance that this data will completely match your official view count.
7. The 301 Mark
You may have seen a lot of videos that have a stagnant count of 301 views. The algorithm behind YouTube’s view counting system believes that any video which has fetched higher than 300 views has the ability to impact people’s perception of quality on YouTube. They do not want the homepage to be crowded with artificially popular videos.
This is why view counts are often frozen at 301. The employees at YouTube then manually verify whether the views obtained so far are legitimate or fake. Once the employees are sure that the views are legit, the counter is unfrozen and you will see an upward swing.
During the period when the view count is frozen every legitimate view is still counted, just not added immediately. Once the YouTube team is sure that your videos are not getting fake traffic, your view count will be updated to include views that were registered during the frozen phase. However, YouTube says it won’t flag videos at 301 views anymore.
Conclusion
In short, we know YouTube expects a viewer to watch a video for around 30 seconds before it counts a view, that views from suspicious accounts are not counted, and that YouTube can decide to freeze your view count while they review your views. They are protecting the site from becoming saturated with videos that only look popular because of bots. Ultimately, ‘how does YouTube count views’ isn’t a question anyone but YouTube can answer for sure, but we do know it isn’t as simple as ‘a view is someone clicking on your video’.
If you want to engage your audience with cool effects and Filmora is the best choice to make a split-screen and green screen video for YouTubers. Download it now to have a try!
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Richard Bennett
Oct 26, 2023• Proven solutions
How does YouTube count views? It’s not as simple as the number of clicks your video gets. If someone sits and refreshes your video over and over without letting it play for any significant time, those refreshes won’t be recorded as views. There is a lot more that goes into the calculation.
- Not Everyone Who Clicks Adds to Your View Count
- How Does YouTube Count Views
- How Does YouTube’s View Count Algorithm Work?
- Account Tracking Factors - Some Viewers Don’t Count
- The Skip & Skim
- Frozen YouTube View Counts
- The 301 Mark
Best YouTube Video Editor - Filmora
After you have created your YouTube channel, do you want to edit videos and upload your first video? Here we recommend using Filmora to easily edit YouTube videos.
You can use Filmora to make YouTube videos with built-in royalty-free audio. Filmora also can help you make YouTube intros. It includes more than 500 templates, transitions, effects, and text resources.
1. Not Everyone Who Clicks Adds to Your View Count
YouTube doesn’t provide a clear definition of what counts as a view, but we know that someone clicks on your video, and clicking right away doesn’t count. That’s how we know that watch time is a factor. Some studies conclude that a full 30 seconds need to be viewed to register as one view, but there is no way to know for sure.
2. How Does YouTube Count Views?
YouTube wants to be sure that views are coming from humans and not bots. So, during the first couple of hours after you publish a video, YouTube seems to be stricter about what they count. The views which are counted are the ones that YouTube believes to be legitimate. Sometimes, it ends up skipping legitimate views for the sake of discretion.
Once this window of time passes, it is likely that you will see the view counter start to update a lot more frequently. The counter could still revert to updating slower and more hesitantly, though, if YouTube’s algorithm thinks it’s detecting something fishy.
At times, your view count can even be frozen temporarily until the algorithm can validate the views you are receiving. This is done to ensure a fair and positive experience for everyone who creates content. View counts can be adjusted by the algorithm in either direction.
You May Also Like:
5 Tips To Get More Views With YouTube Optimization [Free Checklist] >>
3. How Does YouTube’s View Count Algorithm Work?
Termed by many as one of the most boggling algorithms of all time, it is really hard to decode the complete dynamics of the YouTube view count algorithm.
There are some tests you can run yourself to try to unpack it.
If you upload a video and then set it as unlisted it won’t get any public views so you can experiment by doing things like watching for different lengths of time and seeing what gets counted.
You’ll have to use a computer in a different location and make sure the account is not the same as the one you used to upload the video. Now, you need to watch the video for roughly 15 seconds. The key here is to keep it less than 30 seconds. You will see that the view did not add to the count. If you repeat this process on multiple computers at varying locations and with different accounts and you are likely to find the same result.
However, if you watch it for 30 seconds or longer it is likely that the count will go up.
We are adding ‘likely’ here because, despite this 30-second rule which has been decoded, there are other factors that might contribute to whether a view is counted as well as other automated scanning techniques at play.
Try to watch the same video numerous times in a single day. You will find that the count will add up at first, but after some time it will stop. YouTube knows that a lot of times people replay some videos over and over when they really enjoy them, and so they want to factor replays into their algorithm because they suggest quality. However, to avoid spam views, the counter will stop after a certain point.
4. Account Tracking Factors - Some Viewers Don’t Count
Something else that can affect whether a view is counted is the behavior of the account which watches it prior to landing on your video’s watch page. Sometimes, YouTube might feel that there is an increased chance a particular account is actually a bot, and then views from that account might not be added.
One way that YouTube might flag an account as a potential bot is if it is jumping between videos directly without navigating through recommendations, the search engine, or the account’s subscriber feed (how are they getting between these watch page URLs if they aren’t clicking on anything YouTube can record?). To add to it, if the viewer is watching each of the videos for almost 30 seconds exactly (or less) there is an increased probability that it is not a human but a bot (or a human watching the bare minimum as part of a view exchange program).
Any bot-like action will result in an account’s views do not be added to your view count.
5. The Skip & Skim
It’s not uncommon for viewers to watch a video for say five seconds, skip forwards a bit and watch for another ten seconds as they look for a specific part. It is hard to say whether skipping through a video, but watching a scattered 30 seconds, would count as a view or not.
6. Frozen YouTube View Counts
Sometimes YouTube will freeze a view count in order to check that it is accurate. When the count is unfrozen, the count may jump up as views are validated or it can go down if YouTube detects a problem.
You can use YouTube’s analytics reports to monitor an estimate of your potential views, but there is no assurance that this data will completely match your official view count.
7. The 301 Mark
You may have seen a lot of videos that have a stagnant count of 301 views. The algorithm behind YouTube’s view counting system believes that any video which has fetched higher than 300 views has the ability to impact people’s perception of quality on YouTube. They do not want the homepage to be crowded with artificially popular videos.
This is why view counts are often frozen at 301. The employees at YouTube then manually verify whether the views obtained so far are legitimate or fake. Once the employees are sure that the views are legit, the counter is unfrozen and you will see an upward swing.
During the period when the view count is frozen every legitimate view is still counted, just not added immediately. Once the YouTube team is sure that your videos are not getting fake traffic, your view count will be updated to include views that were registered during the frozen phase. However, YouTube says it won’t flag videos at 301 views anymore.
Conclusion
In short, we know YouTube expects a viewer to watch a video for around 30 seconds before it counts a view, that views from suspicious accounts are not counted, and that YouTube can decide to freeze your view count while they review your views. They are protecting the site from becoming saturated with videos that only look popular because of bots. Ultimately, ‘how does YouTube count views’ isn’t a question anyone but YouTube can answer for sure, but we do know it isn’t as simple as ‘a view is someone clicking on your video’.
If you want to engage your audience with cool effects and Filmora is the best choice to make a split-screen and green screen video for YouTubers. Download it now to have a try!
Richard Bennett
Richard Bennett is a writer and a lover of all things video.
Follow @Richard Bennett
Also read:
- [New] 2024 Approved Spotting a Block Snapchat Notifications Gone Mute
- [New] Harnessing Powerful Tools for Effective YouTubers' SEO
- [New] In 2024, Maximize Impact with Insightful YouTube Stats Analysis
- [New] Pro Tips for Effective YouTube Tag Utilization for 2024
- [New] Ranking the Very Best Top 9 Free Logo Design Software
- 「スピーディかつ高品位:オンラインでインストール不要、VOB to MP4変換サービス」
- 2024 Approved Free Guide Recording YouTube Videos on Screencasts
- 2024 Approved Mastery in Captioning A YouTube Creator's Handbook
- 2024 Approved Rhythmic Rarities Assembling the Best DJ Video Samples
- Asus TUF Gaming A14 Laptop Analysis: Unveiling Quiet Durability
- Cookiebot: Elevate Your SEO and Data Collection for Greater Online Success
- Expert's Top Stabilized Cameras for iPhone, Android & Professional Use
- How to Bypass Apple iPhone XS Passcode Easily Video Inside | Dr.fone
- In 2024, Perfect Thumbnail Size for Click-Through Rates
- In 2024, Seize Endless Photographic Content From Elite 4 Video Clips
- In 2024, Stop YouTube Shorts Forever A Step-by-Step Guide
- The Ultimate Guide to Achieving the Best Camera Angle on Your PS4
- Title: Mastering Recording Secrets for Top-Notch Audio for 2024
- Author: Thomas
- Created at : 2024-12-09 16:42:00
- Updated at : 2024-12-16 17:32:33
- Link: https://youtube-help.techidaily.com/mastering-recording-secrets-for-top-notch-audio-for-2024/
- License: This work is licensed under CC BY-NC-SA 4.0.